Skip to main content

Nylon Rollers

I've worked around "Rollers" for decades. I practically grew up around them. Rollers are such an important component of any press and lots of industrial manufacturing machinery. Rollers get used a lot in a variety of ways. Whether they're pushing something through or slowing something down, there is a constant state of friction. Friction causes wear. And rollers can wear out quickly. But now, there are incredible coatings for rollers, that allow the rollers to wear at a much slower pace. Nylon rollers are so versatile...let me tell you a little more about the logic behind it:
Copper and Ebonite® rollers have traditionally been utilized as metering, transfer and oscillator rollers in ink trains in offset and letterpress. 
Nylon (Rilsan-11 ®) has come into its own as a higher performance replacement for copper and Ebonite ®. It provides superior ink transfer and virtually eliminates stripping and expensive maintenance.  Nylon (Rilsan-11 ®) is more chemical resistant, as well as more resistant to scratching and surface damage. The physical properties of nylon (Rilsan-11®) allow it to be finished to a variety of specifications such as polished, spiral grooved, micro-grooved, knurled, or diamond grooved. These different surface configurations will affect the performance of the roller in different ways and allow it to be used in different positions. Smooth nylon (Rilsan-11 ®) is excellent for use in the oscillator or vibrator position while knurled, spiral or diamond-grooved patterns are ideal for the metering position to regulate the laydown of ink. The amount of ink depends on the surface configuration chosen.

Take a look at this page on my firm's website, which talks more about rollers and their "roll" in machinery: http://mgf-services.com/printingslitteranvil-rolls

Comments

  1. SME CoilsAugust 4, 2021 at 6:56 PM

    Thank you for this article! It is so incredible helpful and thorough. I will definitely be using your suggestions .

    ReplyDelete
  2. Surefin Mechanical Equipment, Inc.August 12, 2021 at 5:36 AM

    Remarkable! Its really amazing article, I have got much clear idea about from this paragraph.

    ReplyDelete
  3. Buccma AccumulatorAugust 15, 2022 at 11:45 PM

    Thanks for the best helpful article for sharing with us.

    ReplyDelete

Post a Comment

Popular posts from this blog

Poof...it magically disappears!

Do you have equipment that is idle, taking up space, or needing to upgrade? I have solutions for you. Contact me directly for a FREE consult. Let's create magic! Abracadabra. Yes, we really can make all your surplus equipment disappear. Here’s the latest featured press in our inventory. This Mark Andy Model 2200 is very clean, in excellent condition, and offers a large range of benefits. • Primary Unwind 36” • 8 Print Stations • 2 AAA Light Touch UV Units • 4 Die Stations • 2 Waste Rewind Towers • Secondary Unwind used for Lamination Films • Dual Spindle Rewind • Full Set of 8 Anilox Rolls • Plow Folder • And So Much More! Contact me for a complete equipment list or more details. Mona
6 comments
Read more

Understanding Harden Slitters, Anvil, and Score Rollers for Printing, Packaging, and Industrial Industries

I get lots of questions about Harden Slitters, Anvil, and Score Rollers from my clients and potential clients in the Printing, Packaging, and Industrial industries.  There are hundreds of designs for slitters, whether it’s pneumatic or mechanical for razor, score or shear slitting substrates such as: paper, film, foil, cloth, non-woven, or vinyl. I will generalize a little bit in this post, because it's impossible to cover every type of design in detail. During the lifetime of your equipment you will need to replace your harden rolls more than a few times depending on your operational hours and applications. People often ask me, “How do I get the best value and extended life on my replacement?”   One of the biggest keys to harden rolls’ longevity is the hardness scale and effective depth on the roller construction.  The Rockwell hardness on the slitters must be at least 2-4 points less than the roller construction hardness. The average hardness scale that can be achie
9 comments
Read more

Should you repair or replace your Printing Machinery Parts?

The printing industry is ever-changing, but your machines are always running. When things start to fail, how are you supposed to know if it's better to repair or replace your machinery parts? Unless a part has reached its threshold to repair, you should be able to refurbish most mechanical applications. Such as:  Ceramic rollers  Idler rollers used in handling adhesives, hot plastics, sticky material  Draw rollers  Stationary jaws  Former board and noses  Corona Treater rolls  Chrome rollers  We have some more information on our website: http://www.mgf-services.com/coatings   These parts can be extremely costly to replace. I have been repairing these types of parts for decades. If you hire the right company, you can save a lot of money by expertly refurbishing worn parts. However, there are certain mechanical parts where repair/refurbished are not viable options. In these cases, replacement parts are the only recommendation to ensure quality and perform
2 comments
Read more